Gladex Agent Logs

+        lo_prev=""
         while IFS= read -r lo_p || [[ -n "$lo_p" ]]; do
+            # lo_prev is the line ABOVE lo_last at the end of the walk: the
+            # pair half of the marker test (the loop writes exit= then the
+            # attestation, back to back, so a real attestation always has a
+            # predecessor the loop itself wrote).  Stripped of \r like lo_last,
+            # and captured BEFORE lo_last is overwritten, so a one-line file
+            # ends with an empty lo_prev and can never match a pair.
+            lo_prev="$lo_last"
             lo_last="${lo_p%$'\r'}"
         done < "$lo_f"
         # THE MARKER TEST — what this row will CALL a completion (2026-10-26,
-        # the in-flight echo defect): the loop's attested last line with THIS
-        # log's own run id in it — an echo of another run's attestation carries
-        # that run's id and lands in the else-branch — or the legacy `exit=`
-        # only on logs BEHIND the newest, where the loop has certainly closed
-        # the file (only the newest log can still be open, its last line
-        # transcript content).  Empty lo_rc = no trusted marker; the else
+        # the in-flight echo defect; 2026-10-28, the marker-shape false green):
+        # the loop's attested last line with THIS log's own run id in it — an
+        # echo of another run's attestation carries that run's id and lands in
+        # the else-branch — AND with the loop's own `exit=<rc>` directly above
+        # it carrying the same rc, which is the pair /data/agent-loop.sh writes
+        # and a transcript cannot stage with this log's id (a bare attestation
+        # as the last line is content until the loop writes its predecessor:
+        # run 1014's TEST B, fixed here) — or the legacy `exit=` only on logs
+        # BEHIND the newest, where the loop has certainly closed the file (only
+        # the newest log can still be open, its last line transcript content).
+        # The rc comparison uses BASH_REMATCH[1] from the attestation match
+        # above; `[[ == ]]` is pattern matching, not `=~`, so it does not
+        # reset BASH_REMATCH.  Empty lo_rc = no trusted marker; the else
         # applies the in-flight/stale rules below, unchanged.
         lo_rc=""
-        if [[ "$lo_last" =~ $lo_attested_re ]] && [[ "${BASH_REMATCH[2]}" == "$lo_id" ]]; then
+        if [[ "$lo_last" =~ $lo_attested_re ]] && [[ "${BASH_REMATCH[2]}" == "$lo_id" ]] && [[ "$lo_prev" == "exit=${BASH_REMATCH[1]}" ]]; then
             lo_rc="${BASH_REMATCH[1]}"
         elif [[ "$lo_last" =~ ^exit=([0-9]+)$ ]] && [[ "$lo_f" != "$lo_newest" ]]; then
             lo_rc="${BASH_REMATCH[1]}"
         fi

> build · mimo-v2.6-flash-free
← Edit repo/tools/system-status
Index: repo/tools/system-status
===================================================================
--- repo/tools/system-status
+++ repo/tools/system-status
@@ -1220,9 +1220,9 @@
 }
 
 check_loop_outcomes() {
     local lo_dir="" lo_window lo_thr lo_stale
-    local lo_p lo_f lo_name lo_id lo_last lo_rc lo_age lo_now lo_mtime
+    local lo_p lo_f lo_name lo_id lo_last lo_prev lo_rc lo_age lo_now lo_mtime
     local lo_total=0 lo_start lo_idx lo_newest=""
     local lo_completed=0 lo_ok=0 lo_red=0 lo_inflight=0 lo_nomarker=0 lo_rl=0
     local lo_streak=0 lo_streak_rl=0 lo_first="" lo_lastid="" lo_range=""
     local lo_status lo_detail

> build · mimo-v2.6-flash-free
$ cd /data/repo && bash -n tools/system-status && echo "SYNTAX OK"; ./tools/system-status --help >/dev/null 2>&1; echo "help rc=$?"; time bash tests/test_system_status_failed_units.sh 2>&1 | tail -5
SYNTAX OK
help rc=0

assertions: 445
passed: 443
failed: 2
summary: 445 assertions, 443 passed, 2 failed

real	1m33.736s
user	0m57.636s
sys	0m56.544s
> build · mimo-v2.6-flash-free
$ cd /data/repo && bash tests/test_system_status_failed_units.sh 2>&1 | grep -E '^(FAIL|bad) ' | head -20
(no output)
> build · mimo-v2.6-flash-free
$ cd /data/repo && bash tests/test_system_status_failed_units.sh > /tmp/opencode/fu2.out 2>&1; echo "rc=$?"; tail -4 /tmp/opencode/fu2.out; echo "=== non-ok lines"; grep -vn '^\s*ok\s*-\|^$' /tmp/opencode/fu2.out | head -30
rc=1
assertions: 445
passed: 443
failed: 2
summary: 445 assertions, 443 passed, 2 failed
=== non-ok lines
1:=== 1. empty list: OK '0 failed unit(s)', errors 0, exit 0 ===
11:=== 2. a failed identity shift: ERROR, rc == shift_exit, errors 1 ===
21:=== 3. unit failed outside its own shift: MISMATCH is spelled out ===
29:=== 4. unit died before the wrapper could write a marker: shift_exit=? ===
37:=== 5. a failed unit that is NOT an identity shift: named with rc, no shift_exit ===
40:=== 6. two failed units: the detail counts BOTH, still ONE error ===
48:=== 7. a leading bullet (systemd's ● marker) is still a unit line ===
56:=== 8. systemctl --failed exits non-zero: WARNING 'cannot verify', never green ===
64:=== 9. a line that is not a unit name: WARNING, never '0 failed unit(s)' ===
74:=== 10. systemctl absent from PATH: WARNING, never ok ===
78:=== 11. --help documents the row and its three verdicts ===
86:=== 12. mutation controls: both halves of the contract are load-bearing ===
103:=== 13. the work-volume signal [0.4.299]: a red is sized, and an unasked question is never a number ===
132:--- a shift that produced nothing reads work=0, not an absent field ---
140:--- the shape gate: GNU date accepts a bare number and answers NOW ---
150:--- a repo we cannot read answers work=?, never work=0 ---
152:=== 13b. the attribution split [0.4.337]: own-log vs other paths, and a bare work=0 ===
167:--- work=0 and work=? stay BARE: there is no reading to split ---
184:--- the help must describe the split that exists ---
194:=== 14. the hardened marker read [0.4.307]: a stamp the wrapper did not write must not flip shift_exit ===
195:--- control: the wrapper's own marker is still read ---
203:--- 14a. a full-shape, FUTURE-dated stamp as the last line must not win (§4's measured jonas shape) ---
212:--- 14b. a QUOTED marker (leading + diff prefix, the commonest of the 360) must not win ---
220:--- 14c. full-shape line whose ts is the literal TIMESTAMP (measured) must not win ---
228:--- 14d. full-shape line whose ts has no seconds (measured 2026-10-03T06:34Z) must not win ---
236:--- 14e. when NOTHING in the window is believed, the answer is '?', never a number nobody wrote ---
244:--- 14f. among candidates that ARE believed, the one closest to EOF wins (the residual, pinned not hidden) ---
252:--- the help text must describe the read that exists ---
259:=== 15. log-truncation [0.4.308]: a log that lost >50% of its lines is NAMED, and never turns the box red ===
260:--- 15a. a log that never shrank reads ok, with the count it measured ---
> build · mimo-v2.6-flash-free
$ grep -nE '^(no|fail|FAIL|X|  no)' /tmp/opencode/fu2.out | head -20; echo "=== count by prefix"; sed -E 's/^([a-zA-Z]+) .*/\1/' /tmp/opencode/fu2.out | sort | uniq -c | sort -rn | head -15
508:failed: 2
=== count by prefix
      3 
      1 summary: 445 assertions, 443 passed, 2 failed
      1 passed: 443
      1 failed: 2
      1 assertions: 445
      1 === 9. a line that is not a unit name: WARNING, never '0 failed unit(s)' ===
      1 === 8. systemctl --failed exits non-zero: WARNING 'cannot verify', never green ===
      1 === 7. a leading bullet (systemd's ● marker) is still a unit line ===
      1 === 6. two failed units: the detail counts BOTH, still ONE error ===
      1 === 5. a failed unit that is NOT an identity shift: named with rc, no shift_exit ===
      1 === 4. unit died before the wrapper could write a marker: shift_exit=? ===
      1 === 3. unit failed outside its own shift: MISMATCH is spelled out ===
      1 === 2. a failed identity shift: ERROR, rc == shift_exit, errors 1 ===
      1 === 16. loop-outcomes [0.4.310]: the agent loop's own exit markers, and the streak a mtime guard cannot see ===
      1 === 15. log-truncation [0.4.308]: a log that lost >50% of its lines is NAMED, and never turns the box red ===
> build · mimo-v2.6-flash-free
$ grep -nE '^\s*(no|bad|BAD|FAIL|X)\b' /tmp/opencode/fu2.out | head; echo "---"; grep -nE '(got |should |must )' /tmp/opencode/fu2.out | head -20; echo "--- helper def"; grep -n '^\(ok\|bad\|fail\)()' /data/repo/tests/test_system_status_failed_units.sh
497:  FAIL - M12: any-run-id should reddened the fixture (got status 'ok')
498:  FAIL - M12: expected the manufactured streak (got 'run 1 exit=0, streak=0, window 2: 1 ok / 0 red, 1 in-flight')
---
184:--- the help must describe the split that exists ---
194:=== 14. the hardened marker read [0.4.307]: a stamp the wrapper did not write must not flip shift_exit ===
203:--- 14a. a full-shape, FUTURE-dated stamp as the last line must not win (§4's measured jonas shape) ---
212:--- 14b. a QUOTED marker (leading + diff prefix, the commonest of the 360) must not win ---
220:--- 14c. full-shape line whose ts is the literal TIMESTAMP (measured) must not win ---
228:--- 14d. full-shape line whose ts has no seconds (measured 2026-10-03T06:34Z) must not win ---
252:--- the help text must describe the read that exists ---
312:--- 15g. the help text must describe the row that exists ---
316:--- M6. dropping the row's call site must be visible, not silent ---
319:--- M7. the threshold itself is load-bearing: 60% lost must trip a 2x gate and not a 10x one ---
391:--- 16g. a sandboxed run (no hook, stub systemctl) must NOT read the live directory ---
412:--- 16j. the help text must describe the row that exists ---
416:--- 16k. the provider's CURRENT refusal is rate-limited too: the 39-run streak must not read '(0 rate-limited)' ---
476:--- M8. dropping the row's call site must be visible, not silent ---
479:--- M9. the streak threshold is load-bearing: 5 reds must trip a 5 gate and not a 99 one ---
483:--- M10. the rate-limit needle is load-bearing: the CURRENT provider wording must be counted ---
495:--- M12. the run-id cross-check is load-bearing: an attestation with ANOTHER run's id must not complete a run ---
497:  FAIL - M12: any-run-id should reddened the fixture (got status 'ok')
498:  FAIL - M12: expected the manufactured streak (got 'run 1 exit=0, streak=0, window 2: 1 ok / 0 red, 1 in-flight')
--- helper def
97:ok()  { PASS=$((PASS+1)); echo "  ok   - $1"; }
98:bad() { FAIL=$((FAIL+1)); echo "  FAIL - $1"; }
> build · mimo-v2.6-flash-free
Now the test suite. First make `plant_lastline` variadic and fix the M12 fixture:
← Edit repo/tests/test_system_status_failed_units.sh
Index: repo/tests/test_system_status_failed_units.sh
===================================================================
--- repo/tests/test_system_status_failed_units.sh
+++ repo/tests/test_system_status_failed_units.sh
@@ -1267,20 +1267,23 @@
         printf 'exit=%s\n' "$rc"
     } > "$f"
 }
 
-# plant_lastline <dir> <n> <line> — header + output + ONE arbitrary last line,
-# no loop markers at all: the raw shape §16l's foreign-attestation and
-# legacy-behind-newest fixtures need (a legacy `exit=`, an attestation whose
-# run id belongs to another run).
+# plant_lastline <dir> <n> <line>... — header + output + ONE or MORE arbitrary
+# trailing lines, no loop markers at all: the raw shape §16l/§16m fixtures
+# need (a legacy `exit=`, an attestation whose run id belongs to another run,
+# a bare attestation sitting on transcript content — run 1014's TEST B).
+# Variadic since §16m: the pair half of the marker test needs a predecessor
+# line, and each argument is one line, written in order.
 plant_lastline() {
-    local dir="$1" n="$2" last="$3"
+    local dir="$1" n="$2" line=""
+    shift 2
     local f="$dir/run-20261012-$(printf '%06d' "$n")-${n}.log"
     mkdir -p "$dir" || return 1
     {
         printf '=== run %s at 2026-10-12T03:10:00+02:00 model=opencode/mimo-v2.6-flash-free ===\n' "$n"
         printf 'run output happened\n'
-        printf '%s\n' "$last"
+        for line in "$@"; do printf '%s\n' "$line"; done
     } > "$f"
 }
 
 # loop_run <dir> [bin] / loop_rc <dir> [bin] — this section's own runner: the

Error: Free usage limit reached. Free models work in OpenCode (https://opencode.ai); subscribe to OpenCode Go to keep going: https://opencode.ai/go
exit=1
agent-loop-exit=1 run=2440

Select another run log from the list above. Only files matching run-YYYYMMDD-HHMMSS-N.log are readable.

[Wed Oct 28 05:46:43 2026] 127.0.0.1:54434 Accepted
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54434 Closing
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54440 Accepted
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54440 Closing
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54456 Accepted
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54456 Closing
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54466 Accepted
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54466 Closing
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54472 Accepted
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54472 Closing
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54482 Accepted
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54482 Closing
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54496 Accepted
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54496 Closing
[Wed Oct 28 05:46:43 2026] 127.0.0.1:54504 Accepted
[Wed Oct 28 05:46:44 2026] 127.0.0.1:54504 Closing
[Wed Oct 28 05:46:44 2026] 127.0.0.1:54516 Accepted
[Wed Oct 28 05:46:44 2026] 127.0.0.1:54516 Closing
[Wed Oct 28 05:56:33 2026] 127.0.0.1:40924 Accepted
[Wed Oct 28 05:56:33 2026] 127.0.0.1:40924 Closing
[Wed Oct 28 05:58:48 2026] 127.0.0.1:59150 Accepted
[Wed Oct 28 05:58:48 2026] 127.0.0.1:59150 Closing
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43916 Accepted
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43916 Closing
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43928 Accepted
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43928 Closing
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43938 Accepted
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43938 Closing
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43952 Accepted
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43952 Closing
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43968 Accepted
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43968 Closing
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43980 Accepted
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43980 Closing
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43982 Accepted
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43982 Closing
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43996 Accepted
[Wed Oct 28 06:00:29 2026] 127.0.0.1:43996 Closing
[Wed Oct 28 06:00:29 2026] 127.0.0.1:44004 Accepted
[Wed Oct 28 06:00:30 2026] 127.0.0.1:44004 Closing
[Wed Oct 28 06:00:30 2026] 127.0.0.1:44008 Accepted
[Wed Oct 28 06:00:30 2026] 127.0.0.1:44008 Closing
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38484 Accepted
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38484 Closing
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38500 Accepted
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38500 Closing
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38504 Accepted
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38504 Closing
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38520 Accepted
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38520 Closing
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38532 Accepted
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38532 Closing
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38548 Accepted
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38548 Closing
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38562 Accepted
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38562 Closing
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38576 Accepted
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38576 Closing
[Wed Oct 28 06:01:42 2026] 127.0.0.1:38592 Accepted

Other app logs: downloads.log