Gladex Agent Logs

- **The scope of section F's rule was prose, not code.** After `[0.4.176]` the *rule* was machine-checked but its *scope* was not: the literal `^- Live` was spelled independently in the `fig_live` selector, in the `fig_scope` union and in the `DIAG` extraction, and quoted a fourth time in this file and in the suite's `--help`. A claim line written as a continuation of its own bullet — which is how registry sections normally continue a bullet — therefore sat outside all four readers at once while the prose above them said "every numeric `- Live:` bullet".
- **Measured, not assumed:** `tools/REGISTRY.md` holds **19** `Live` claim lines under the widened shape and **14** under `^- Live` alone. The five the literal could not see are `Live transcript …` and `Live: repo-lint --format json --sha HEAD …` (both carrying no digit, so out of the numeric rule by content as well as by indentation) and three `Live (…[0.4.46]/[0.4.47]/[0.4.49]… run)` lines under `system-status` — **numeric and undated**, i.e. exactly the `[0.4.176]` finding still sitting in the file one rule later.
- **Those three are now dated `measured 2026-09-25`**, the date of the `[0.4.46]`/`[0.4.47]`/`[0.4.49]` runs their own citations name — so the date and the citation agree instead of one standing in for the other.

### Changed

- **`LIVE_RE` is defined once and read by all four readers of section F** — the singular-count selector, the `fig_scope` undated union, the `DIAG` text extraction, and the two helpers the controls read back (`figure_lines`, `first_figure`). Shape is *optional indent + optional `- ` bullet + optional `**`*, so `- Live: …`, `  Live: …` and `- **Live**: …` are one scope rather than three documents. The boundary can no longer be moved by editing a comment: to widen the rule you must edit the one line every reader reads.
- **The decision (120) asked for, taken explicitly:** a `[0.4.x]` citation is **not** accepted as machine-checked attribution. A date is the one token any reader can check without opening a second file, whereas resolving a citation depends on a changelog parse that `[0.4.175]` had just shown to be ambiguous (anchored vs greedy). So the shape chosen is *both* halves — date the three lines, **and** make the scope itself code — rather than either half alone.
- All four readers now agree by construction on what a claim line is: measured on the live registry, `fig_live` reads **1** suite-carrying claim line before and after, and `first_figure` reads **83** before and after, so the widening changed *what could be seen*, not what is currently seen.

### Tests

- **`C34` (12 assertions)** — an indented `Live` claim line that *is* dated loses its date, and **`C34c` asserts the old `^- Live` spelling cannot see the plant at all**, i.e. the defect is asserted rather than narrated. Then exit 1, `VIOLATION figure_undated live`, exactly one violation, `fig_undated 1`, a `DIAG` whose `text=` really carries the word `Live` (an indented line must be *named*, not merely counted), `fig_live` still 1 and `fig_stale` still 0.
- **`C35` (10 assertions)** — the same boundary seen from the other reader: an indented claim line gains a suite figure, so the registry now holds two live claims and the **singular** rule reddens. The plant reuses the figure the real claim already carries, so staleness and the undated rule cannot be what fires — `fig_undated 0`, `figure_stale 0`, and `violations 1`, isolating the scope of the count as the only thing that changed. `C35j` pins the helper and the checker to the same definition (`figure_lines` reads 2).
- **Four mutants, each killed by its own intended assertion**, run against a copy of the tree under `/tmp/opencode` with the working tree untouched: reverting the `fig_scope` selector to `^- Live` → **C34e–C34j red (313/7)**; reverting the `fig_live` selector → **C35d–C35g red (315/5)**; reverting only the `DIAG` extraction → **C34j alone red (318/2)**; reverting only `figure_lines` → **C35j alone red (318/2)**. Every run also reddens F8 with `got=na`, the `/tmp` copy having no git repository — the documented non-vacuity path, present with and without the mutant and attributed rather than counted as its kill.
- Suite **298 → 320 passed / 0 failed**; controls **C1…C35** contiguous (counted from the file); `- Live:` suite figure untouched (**83**); no tool source and no `app/src/php` file changed → **no reviewer gate, no promote**, prod untouched (**0.4.28**), `GLADEX_APP_VERSION` unchanged (this entry is appended at the bottom, so the changelog's *first* heading did not move).

### Notes

- **The class, stated once:** a rule whose scope lives in a comment is a rule with an unguarded edge, and each previous step widened the *checks* while leaving the *scope* spelled at every use site. (119) widened what is checked; this entry widens which lines can be checked, and does it by deleting the duplicated literals rather than by adding a fourth one.
- Two of the five indented lines carry no digit and are therefore out of the *numeric* rule by content — that is deliberate and declared (the rule checks dates on numeric claims), not an oversight; they are now in scope for the **count** rule, which is the reader that would otherwise have missed a second live claim.

### Queue
Authoritative next-candidate queue lives in `agent-logs/PROGRESS.md`, in the `Next-candidate queued, not actioned` bullet of the newest run entry — it is not duplicated here, and has not been since `[0.4.67]`. To read the live queue, open `PROGRESS.md`; to know whether that is still true, run `tools/queue-source-check`.
EOF
grep -c '^## \[' CHANGELOG.md; grep -n '^## \[' CHANGELOG.md | tail -2
182
7017:## [0.4.176] - 2026-10-03 — queue item (119): the six undated `- Live:` bullets in `tools/REGISTRY.md` are dated — and three of the claims they carried were **wrong when re-measured** — while section **F**'s undated rule widened from `<N> suites` to **every numeric `- Live:` bullet**, guarded by new control **C33** (suite **280 → 298**)
7056:## [0.4.177] - 2026-10-03 — queue item (120): the boundary `[0.4.176]` widened was still written as **prose** — `^- Live` appeared three times as a literal and nowhere as a shared rule, so an indented `Live` claim line was invisible to every reader; `LIVE_RE` is now one definition four readers share, guarded by **C34** + **C35** (suite **298 → 320**)
> build · mimo-v2.6-flash-free
$ cd /data/repo && echo "--- queue-source (expected mid-run red) ---" && ./tools/queue-source-check --format json 2>&1 | head -c 500; echo; echo "rc=$?"; echo "--- repo-lint suite ---"; bash tests/test_repo_lint.sh 2>&1 | tail -3; echo "--- changelog api ---"; php tests/test_changelog_api.php 2>&1 | tail -3; echo "--- changelog mobile ---"; php tests/test_changelog_mobile.php 2>&1 | tail -3
--- queue-source (expected mid-run red) ---
{"changelog": "/data/repo/CHANGELOG.md", "detail": "1 violation(s): [0.4.177] is not named in agent-logs/PROGRESS.md - the newest CHANGELOG entry has no record in the authoritative file", "error": "1 violation(s): [0.4.177] is not named in agent-logs/PROGRESS.md - the newest CHANGELOG entry has no record in the authoritative file", "exit_code": 1, "ok": false, "progress": "/data/repo/agent-logs/PROGRESS.md", "repo_root": "/data/repo", "rules": {"duplicate_queue_sections": 0, "frozen_items_actual
rc=0
--- repo-lint suite ---
===============================
repo-lint suite: 463 passed, 0 failed
===============================
--- changelog api ---
  PASS: a heading the API cannot parse is reported as unparseable, not counted as an entry

=== Results: 86 passed, 0 failed ===
--- changelog mobile ---
  PASS: the prod environment answered /changelog (this section cannot skip everything)

=== Results: 125 passed, 0 failed, 0 skipped ===
> build · mimo-v2.6-flash-free
$ cd /data/repo && bash tests/test_registry_coverage.sh 2>&1 | tail -4
PASS: G38 and the three left cl_other rather than being counted twice
PASS: G39 and the codes the three probes actually returned are printed for a reader to watch

=== Results: 320 passed, 0 failed ===
> build · mimo-v2.6-flash-free
$ cd /data/repo && ./tools/healthcheck --format json 2>&1 | head -c 700; echo; echo "--- version ---"; grep -n 'GLADEX_APP_VERSION=' app/src/php/app.php 2>/dev/null | head -3 || grep -rn 'GLADEX_APP_VERSION' app/src/php/ | head -3
[
  {
    "url": "http://localhost:8000/healthz",
    "timestamp": "2026-10-03T03:06:49.547185Z",
    "healthy": true,
    "status_code": 200,
    "response": "{\"status\":\"ok\",\"service\":\"gladex-investor-app\",\"env\":\"dev\",\"timestamp\":1790996809,\"version\":\"0.4.28\"}",
    "error": null
  },
  {
    "url": "http://localhost:8001/healthz",
    "timestamp": "2026-10-03T03:06:49.575034Z",
    "healthy": true,
    "status_code": 200,
    "response": "{\"status\":\"ok\",\"service\":\"gladex-investor-app\",\"env\":\"prod\",\"timestamp\":1790996809,\"version\":\"0.4.28\"}",
    "error": null
  }
]

--- version ---
$ cd /data/repo && git status --porcelain; echo "--- STEP0 ---"; sqlite3 /opt/startup/dev/data/messages.db "SELECT count(*) FROM messages WHERE direction='investor_to_agent' AND read=0;"; sqlite3 /opt/startup/prod/data/messages.db "SELECT count(*) FROM messages WHERE direction='investor_to_agent' AND read=0;"; ./tools/inbox-status --format json 2>&1 | python3 -c "import json,sys; d=json.load(sys.stdin); print('owed',d['owed'],'ok',d['ok'],'last',d['last_reply'])"; echo "--- budget ---"; ./tools/budget-show --format json 2>&1 | head -c 400; echo; echo "--- census ---"; echo "tools=$(ls -1 tools | grep -v -E '__pycache__|\.py$|REGISTRY' | wc -l)"; grep -c '^## ' tools/REGISTRY.md; ./tools/regression-run --list 2>&1 | tail -1; ls tests | wc -l; grep -oE '^- Live[^0-9]*[0-9]+ suites' tools/REGISTRY.md
M CHANGELOG.md
 M tests/test_registry_coverage.sh
 M tools/REGISTRY.md
--- STEP0 ---
0
0
owed {'unread_messages': 0, 'unreplied_entries': 0, 'total': 0} ok True last {'dev': {'id': 142, 'ts': '1790908202'}, 'prod': {'id': 107, 'ts': '1790908202'}}
--- budget ---
{
  "month": "2026-10",
  "allowance": "5.00",
  "spent": "0.00",
  "spent_note": "no October charge recorded anywhere — gladex.de renews at 1.50/mo, renewal date NOT on file, raised as NEEDS-INVESTOR in REPORT.md §14, so this figure may understate a known recurring cost",
  "remaining": "5.00",
  "log": [
    "2026-09-20: init, no domains ordered yet",
    "2026-09-20: investor APPROVED gladex
--- census ---
tools=23
36
result: 83 suite(s) discovered, none run (exit 0)
83
> build · mimo-v2.6-flash-free
$ cd /data/repo && echo "=== remaining literal ^- Live in code ==="; grep -rn '^- Live\|\^- Live\|[^$]Live' --include=*.sh tests/ | grep -E "\^- Live" | head -20; echo "--- broader ---"; grep -rn -- '\^- Live' tests/ tools/ | head -20; echo "=== LIVE_RE occurrences ==="; grep -rn 'LIVE_RE' tests/ tools/ | head -20; echo "=== Live figure line ==="; grep -nE '^\- Live[^0-9]*[0-9]+ suites|^- Live.*[0-9]+ suites' tools/REGISTRY.md | cut -c1-90
=== remaining literal ^- Live in code ===
tests/test_registry_coverage.sh:351:# literal `^- Live` inside a comment and inside REGISTRY.md, so a claim put on
tests/test_registry_coverage.sh:1021:  #     rather than spelled `^- Live` at each use site, so an indented
tests/test_registry_coverage.sh:1065:  # them numeric and none dated, and `^- Live` matched none. The selector
tests/test_registry_coverage.sh:1192:     old `^- Live` spelling cannot see the plant at all
tests/test_registry_coverage.sh:1601:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:1651:for cand in re.finditer(r'^- Live[^\n]*\n', s, flags=re.M):
tests/test_registry_coverage.sh:1680:dup_line=$(grep -E '^- Live' "$D/tools/REGISTRY.md" \
tests/test_registry_coverage.sh:1700:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:1715:  grep -qE '^- Live.*all of them' "$D/tools/REGISTRY.md"
tests/test_registry_coverage.sh:2353:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:2457:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:2474:undated_line=$(grep -E '^- Live' "$D/tools/REGISTRY.md" | grep 'XXXX-XX-XX')
tests/test_registry_coverage.sh:2501:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:2531:# was still the literal `^- Live`, written in this file's comment and quoted
tests/test_registry_coverage.sh:2566:expect_not "C34c plant: and the OLD ^- Live spelling cannot see it at all - the (120) defect" \
tests/test_registry_coverage.sh:2567:  sh -c 'printf "%s\n" "$1" | grep -qE "^- Live"' _ "$c34_line"
tests/test_registry_coverage.sh:2597:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:2614:expect_not "C35c plant: and the OLD ^- Live spelling cannot see it, so it could never have been counted" \
tests/test_registry_coverage.sh:2615:  sh -c 'printf "%s\n" "$1" | grep -qE "^- Live"' _ "$c35_line"
--- broader ---
tests/test_registry_coverage.sh:351:# literal `^- Live` inside a comment and inside REGISTRY.md, so a claim put on
tests/test_registry_coverage.sh:1021:  #     rather than spelled `^- Live` at each use site, so an indented
tests/test_registry_coverage.sh:1065:  # them numeric and none dated, and `^- Live` matched none. The selector
tests/test_registry_coverage.sh:1192:     old `^- Live` spelling cannot see the plant at all
tests/test_registry_coverage.sh:1601:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:1651:for cand in re.finditer(r'^- Live[^\n]*\n', s, flags=re.M):
tests/test_registry_coverage.sh:1680:dup_line=$(grep -E '^- Live' "$D/tools/REGISTRY.md" \
tests/test_registry_coverage.sh:1700:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:1715:  grep -qE '^- Live.*all of them' "$D/tools/REGISTRY.md"
tests/test_registry_coverage.sh:2353:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:2457:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:2474:undated_line=$(grep -E '^- Live' "$D/tools/REGISTRY.md" | grep 'XXXX-XX-XX')
tests/test_registry_coverage.sh:2501:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:2531:# was still the literal `^- Live`, written in this file's comment and quoted
tests/test_registry_coverage.sh:2566:expect_not "C34c plant: and the OLD ^- Live spelling cannot see it at all - the (120) defect" \
tests/test_registry_coverage.sh:2567:  sh -c 'printf "%s\n" "$1" | grep -qE "^- Live"' _ "$c34_line"
tests/test_registry_coverage.sh:2597:for cand in re.finditer(r'^- Live[^\n]*$', s, flags=re.M):
tests/test_registry_coverage.sh:2614:expect_not "C35c plant: and the OLD ^- Live spelling cannot see it, so it could never have been counted" \
tests/test_registry_coverage.sh:2615:  sh -c 'printf "%s\n" "$1" | grep -qE "^- Live"' _ "$c35_line"
tools/REGISTRY.md:3757:  and none dated, and the literal `^- Live` matched none. Controls **C34**
=== LIVE_RE occurrences ===
tests/test_template_sync.sh:146:LIVE_REAL=$(realpath "$LIVE")
tests/test_template_sync.sh:241:  "cp $LIVE_REAL/AGENT_BRIEF.md $(realpath "$SB/tmpl_drift")/AGENT_BRIEF.md" "$OUT"
tests/test_registry_coverage.sh:355:LIVE_RE='^[[:space:]]*(- )?[[:space:]]*(\*\*)?[[:space:]]*Live'
tests/test_registry_coverage.sh:1020:  #     and, since queue item (120), "claim line" is read from `$LIVE_RE`
tests/test_registry_coverage.sh:1039:  # The live figure: a `Live` claim line (read from `$LIVE_RE`) that also
tests/test_registry_coverage.sh:1053:$(grep -E "$LIVE_RE" "$registry" | grep -E '[0-9]+ suites([^_[:alnum:]]|$)')
tests/test_registry_coverage.sh:1066:  # below is now `$LIVE_RE`, the one definition at the top of this file, so
tests/test_registry_coverage.sh:1080:                 grep -E "$LIVE_RE" "$registry" | grep -E '[0-9]'; } \
tests/test_registry_coverage.sh:1090:           echo "DIAG figure_undated_line subject=$fig_subj text=$(printf '%s\n' "$line" | grep -oE "$LIVE_RE.{0,60}")"; }
tests/test_registry_coverage.sh:1168:(120) a "claim line" is read from ONE definition (`LIVE_RE`: optional indent,
tests/test_registry_coverage.sh:1190:     from ONE definition, `LIVE_RE`, which admits an indented continuation —
tests/test_registry_coverage.sh:1583:  grep -E "$LIVE_RE" "$1" | grep -cE '[0-9]+ suites([^_[:alnum:]]|$)'
tests/test_registry_coverage.sh:1586:  grep -E "$LIVE_RE" "$1" | grep -E '[0-9]+ suites([^_[:alnum:]]|$)' \
tools/REGISTRY.md:3754:  `LIVE_RE` = optional indent + optional `- ` bullet + optional `**`. A
tools/REGISTRY.md:3920:`LIVE_RE` definition — indent, bullet and bold are one scope — so an
=== Live figure line ===
3042:- Live (measured 2026-10-02): `./tools/regression-run` → **83 suites** discovered �
$ cd /data/repo && ./tools/system-status --format json 2>&1 | python3 -c "
import json,sys
d=json.load(sys.stdin)
print('ok',d.get('ok'),'errors',len(d.get('errors',[])),'warnings',len(d.get('warnings',[])))
for r in d.get('rows',[]):
    if r.get('status')!='ok': print(' ',r.get('name'),'|',r.get('status'),'|',str(r.get('detail'))[:160])
" 2>&1 | head -20; echo "rc=$?"
Traceback (most recent call last):
  File "<string>", line 4, in <module>
TypeError: object of type 'int' has no len()
rc=0
> build · mimo-v2.6-flash-free
$ cd /data/repo && ./tools/system-status 2>&1 | grep -E 'Overall|WARN|\[OK\] (git-tree|queue-source|investor|red-watch|promote-gates)' | head -25; echo "EXIT=$?"
SOA:gladex.de             [WARN] serial=2026092602 consistent on 1.1.1.1+8.8.8.8; mname=placeholder (NEEDS-INVESTOR open)
  git-tree                  [WARN] 3 uncommitted changes
  red-watch                 [WARN] red, failed=5, since 2026-10-03T02:31:37Z, 8m old; FAIL A3 tree clean AND in sync with origin/main (kind=is key=git want=## main...origin/main) ;; FAIL A15 git-tree reports a clean tree (kind=contains key=sys want=[OK] clean) ;; FAIL A16 system-status json exits 0 (kind=rc key=sysj want=0) ;; FAIL A17 json channel says overall ok (kind=contains key=sysj want=overall:ok) ;; FAIL A18 json channel says zero errors (kind=contains key=sysj want=errors:
  promote-gates             [WARN] not promotable (newest reviewer-mailbox entry 2026-09-30T02:26:00Z, 3d 0h old): verdict REFUSED: verdict VERDICT-20260930T022500-team-sofia.md is STALE (promoted source [app/src/php, examples/workflows] changed 223409s after it \u2014 re-review required) | dev-sync OK | commit-lint OK | ship-tree OK (commit fbcad3b)
Overall: 1 CHECK(S) FAILED
EXIT=0
> build · mimo-v2.6-flash-free
$ cd /data/repo && ./tools/system-status --format json 2>&1 | python3 -c "
import json,sys
d=json.load(sys.stdin)
print('keys:', list(d.keys()))
print('ok:', d.get('ok'), 'errors:', d.get('errors'), 'warnings:', d.get('warnings'))
print('overall:', d.get('overall'))
for r in d.get('checks', d.get('results', [])):
    if isinstance(r, dict) and r.get('status') not in (None,'ok','OK'):
        print(' NON-OK:', r.get('name'), r.get('status'), str(r.get('detail'))[:120])
"
keys: ['overall', 'errors', 'checks']
ok: None errors: 1 warnings: None
overall: error
 NON-OK: SOA:gladex.de warning serial=2026092602 consistent on 1.1.1.1+8.8.8.8; mname=placeholder (NEEDS-INVESTOR open)
 NON-OK: git-tree warning 3 uncommitted changes
 NON-OK: red-watch warning red, failed=5, since 2026-10-03T02:31:37Z, 9m old; FAIL A3 tree clean AND in sync with origin/main (kind=is key=git want
 NON-OK: queue-source error 1 violation(s): [0.4.177] is not named in agent-logs/PROGRESS.md - the newest CHANGELOG entry has no record in the autho
 NON-OK: promote-gates warning not promotable (newest reviewer-mailbox entry 2026-09-30T02:26:00Z, 3d 0h old): verdict REFUSED: verdict VERDICT-2026093
> build · mimo-v2.6-flash-free
Let me measure the follow-up item rather than assert it — does any gate watch `LIVE_RE` itself?

Select another run log from the list above. Only files matching run-YYYYMMDD-HHMMSS-N.log are readable.

[Sat Oct  3 05:07:21 2026] 127.0.0.1:50840 Accepted
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50840 Closing
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50852 Accepted
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50852 Closing
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50864 Accepted
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50864 Closing
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50878 Accepted
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50878 Closing
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50884 Accepted
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50884 Closing
[Sat Oct  3 05:07:21 2026] 127.0.0.1:50892 Accepted
[Sat Oct  3 05:07:22 2026] 127.0.0.1:50892 Closing
[Sat Oct  3 05:07:22 2026] 127.0.0.1:50908 Accepted
[Sat Oct  3 05:07:22 2026] 127.0.0.1:50908 Closing
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38708 Accepted
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38708 Closing
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38714 Accepted
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38714 Closing
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38722 Accepted
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38722 Closing
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38734 Accepted
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38734 Closing
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38748 Accepted
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38748 Closing
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38764 Accepted
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38764 Closing
[Sat Oct  3 05:08:46 2026] 127.0.0.1:38780 Accepted
[Sat Oct  3 05:08:47 2026] 127.0.0.1:38780 Closing
[Sat Oct  3 05:08:47 2026] 127.0.0.1:38796 Accepted
[Sat Oct  3 05:08:47 2026] 127.0.0.1:38796 Closing
[Sat Oct  3 05:08:47 2026] 127.0.0.1:38800 Accepted
[Sat Oct  3 05:08:47 2026] 127.0.0.1:38800 Closing
[Sat Oct  3 05:08:47 2026] 127.0.0.1:38816 Accepted
[Sat Oct  3 05:08:47 2026] 127.0.0.1:38816 Closing
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59900 Accepted
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59900 Closing
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59906 Accepted
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59906 Closing
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59908 Accepted
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59908 Closing
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59924 Accepted
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59924 Closing
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59934 Accepted
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59934 Closing
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59944 Accepted
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59944 Closing
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59948 Accepted
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59948 Closing
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59950 Accepted
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59950 Closing
[Sat Oct  3 05:09:44 2026] 127.0.0.1:59966 Accepted
[Sat Oct  3 05:09:45 2026] 127.0.0.1:59966 Closing
[Sat Oct  3 05:09:45 2026] 127.0.0.1:58358 Accepted
[Sat Oct  3 05:09:45 2026] 127.0.0.1:58358 Closing
[Sat Oct  3 05:10:27 2026] 127.0.0.1:49328 Accepted
[Sat Oct  3 05:10:27 2026] 127.0.0.1:49328 Closing
[Sat Oct  3 05:11:06 2026] 127.0.0.1:45900 Accepted
[Sat Oct  3 05:11:06 2026] 127.0.0.1:45900 Closing
[Sat Oct  3 05:11:06 2026] 127.0.0.1:45910 Accepted